Facebook Twitter RSS

Four Great Tips for Getting a Rifle Ready for the Hunting Season

Every hunter wishes to get the best catch during the hunting season. However, it is very important to get your rifles ready before you put a step forward to hunt. Neglecting your rifle can put you in trouble when you least expect it. You need to maintain your rifle well and get it ready for the hunting season to avoid catastrophic situations that can arise due to rifle failure or improper maintenance of the rifle.

Check your action

Whether you are using your old used rifle or a brand new one for the hunting season, you need to check the action to ensure it won’t end up biting you in the field. When using a used rifle, you need to check it thoroughly everywhere for cracks. You also need to cycle several shells to confirm proper performance of the rifle’s magazine, as all springs tend to wear out over time. Also, it is wise to check for feeding and extraction before you march with the rifle for hunting.

Confirm the zero

Most hunters tend to pull out their rifles and other sporting goods in Savannah just before the hunting season. So it is very important to check the rifle’s performance before going for hunting, as it tends to be lying unused for a long time. You need to shoot a few groups to ensure that everything is tuned up and tuned in. Shoot a three shot group and then look for loose screws and parts. If you find anything out of place, correct it and then send a few more rounds down range.

Clean and foul the barrel

Even though it may sound bewildering to many shooters, it’s a fact that dirty barrels shoot better. Cost-effective, non-custom factory rifle bores tend to have tiny imperfections. These microscopic flaws cause inaccuracy, but when a bullet is fired the copper residue from the expanding shell fills these tiny areas and this makes the rifle more accurate.

Hunters always want to shoot through a cool barrel to achieve maximum accuracy so they clean it thoroughly after every shooting session. However, for hunting precision it is advisable to shoot a round or two through the barrel and leave your rifle dirty. This will ensure your rifle is dialed in. Some ace bench shooters shoot as many as 100 to 150 rounds without cleaning to ensure the accuracy.

Check the extras

Examine whether all the components of your rifle are intact. Check the swivel studs. Inspect your stock for cracks. The presence of cracks is an indication of damage which needs to be checked out before using the rifle. Also, it is wise to check your rifle case to ensure that everything is functioning properly. Examine the bipod attachment points and hardware to ensure safe use of this used sports equipment from Savannah, GA, when hunting.

If you follow these four useful tips for getting a used rifle ready for the hunting season, you can have a safe and enjoyable hunting experience. Also, it is wise to examine and then buy a used rifle from sporting goods classifieds to ensure safe and appropriate use of rifle while hunting.